I totally have to give Mountain Hardwear props for their great customer service and standing by their products with their limited lifetime warranty. I'm on my third tent which has been replaced twice for free under their warranty. This tent is my lightweight backcountry 2 person tent I have been using on many of my adventures. I bought my first tent in 2004 or 2005 - it was an Airjet 2. This was a single wall lightweight tent that I liked quite a bit. I had it for 3 or 4 years and the seams started to degrade and fall apart - something to do with the chemicals in the material or taped seams breaking down. I sent it in for warranty at the time and they replaced this tent with a Skyledge 2.1 tent for free, as the Airjet was discontinued. The Skyledge was a standard two wall tent with two entrances and two vestibules, which gave lots of real estate for stashing gear and easy entrances if you happen to have towo people in the tent (I only did once and it was cramped).
Now the Skyledge 2.1 I have had for the last 8 years and it served me well those 8 years. I was car camping just a month ago with it and noticed the bottom side of the fly getting sticky when it has never been sticky... along with the taped seams flaking. At one point while just zipping up the fly, one of the taped seams just peeled off with little force. Seems like a degradation issue again, but this time the tent lasted much longer. I contacted Mountain Hardwear and they told me to send it in for assessment. I didn't really expect much from them. After all, 8 years for a tent is quite enough already. There's certainly not much other pieces of gear, especially ones containing some kind of fabric that you would expect to last much longer than that.
Mountain Hardwear/Columbia Sportswear (they are the same company) called me after receiving the tent to say they would replace my tent for free under warranty! Great stuff. They even gave the the option of either getting the newer model Ghost Sky 2 tent or the Ghost UL2 tent. I chose the Ghost Sky 2 tent. Although the Ghost 2 is slightly heavier than the Ghost UL 2 tent (4lb 1 oz vs 2lb 9 oz),The Ghost Sky 2 is just is much more practical - with a square footprint instead of a trapezoidal footprint, 2 entrances and 2 useful vestibules instead of the 1 not-so-useful (as reports say) vestibule of the UL 2 tent. For super ultralight expeditions I could also use my Hennessey Hammock, so I chose the Ghost Sky 2 tent.
The Ghost 2 tent is really a newer version of my older Skyledge 2.1 tent. It amazes me that tents continue to evolve so much. The improvements on the Ghost Sky 2 tent are noticeable andd welcome. The two main poles have a connector in the center. This makes for much quicker setup and breakdown, as you can do both poles at the same time, and justclip the center of the tent to the attachment point instead of having to thread the poles through the c-clip on the Skyledge. the shorter crossbar for the doors just clips into the top and attaches at the sides with a ball joint clip. Fancy stuff and so easy to set up. There are 12 pole clips that are quick and easy to clip to the poles as well.
The inner tent is almost all mesh, perfect for gazing at the stars flyless on non-rainy nights. The two teardrop shaped entrance ports are large enough to enter with ease. Inside, there's 4 pockets for storing gear and loop provisions in the upper part for a gear loft if that's desired. The fly is easy to put on with some toggles that attach to the pole attachments on the 4 corners and velcro ties to the poles in the 4 corners as well, halfway up.
I used this tent car camping, kayak camping and backpacking in Algonquin Park recently and it's a great tent, I would recommend it to anyone, for it's features, well thought out design, qucikness and ease of pitching, and it's light weight.
And again, props to Mountain Hardwear/Columbia for replacing this tent free under warranty with no hassles. I'm sure i'll get a lot of use out of this tent in my future adventures.
I spent the last hour trying to figure out how to attach the footprint to the tent. I too had to return a tent for this one; my prior tent, the Skyledge 2 DP, has a footprint that lined up flawlessly with the tent, and had obvious clips that attached to the ball ends of the poles; it was crystal clear how to attach it, and it fit perfectly. THIS tent however has a horrible manual, and the footprint has nothing but brass holes on a cord at each corner, and they are far too long to attach where the tent poles attach to the tent itself. I give up!! 😩
ReplyDelete