Showing posts with label Garmin. Show all posts
Showing posts with label Garmin. Show all posts

Friday, 3 June 2016

Garmin eTrex30X First Impressions

I'm preparing to go to the Adirondack High Peaks on Sunday and although it's not a must have, I do like to have a GPS for a little added security and lower frustration in some situations especially since I will be solo. I pulled out my old Garmin 62s and found out the micro USB connector had crapped out and I couldn't connect at all to my computer.  If I had a bunch of time, I'd probably send it in to Garmin to get it fixed, but I don't have time.  I figured I'd pick up a new one instead.  After doing some research I think I'd like an eTrex 30X.  Besides Garmin there really isn't much competition other than Delorme.
I can't stand touch screens for backcountry.  I don't know who would.  Your hands are dusty, wet, covered in gloves, etc.  But some people must since Garmin keeps pumping out new models. The eTrex and the 64s aren't touch screen.  The eTrex is the only thing you can even remotely call light weight in Garmin's lineup.  Somewhere along the line it seems noone gave Garmin's product managers the memo that people like super light weight things in the backcountry.  My old 62s is a beast and the newer 64s hasn't changed at all since that.  Honestly I think the only thing different is the processor is faster and maybe more memory.  The eTrex blows the others away in terms of weight, as well as an impressive-on-paper 25 hours operating time on batteries, compared to 16 for most others Garmin offers. On top of that, the resolution of 240x320 is twice that of the 64s ridiculously low resolution of  160x240 (what is this, 1992?).
Opening the box and taking it out, the 30X IS small, with a smaller screen compared to my 62s.  That's OK.  I transfered my old SD card with some maps on it to the 30X, fired it up and put some maps on the 30X via MapSource (screw Basecamp, it still sucks), then threw some batteries in it and turned it on.  The rear cover has a quarter turn lock on it, similar to the 62S but not with the overdesigned investment cast aluminum dovetail the 62S has - this time it's plastic for the eTrex, and I'm OK with that.  I managed to set my preferences easily enough as the controls and still confusing-as-hell to find the option you want OS is very similar to the 62s.
Putting it on my kitchen scale, the 30X is 99 grams sans betteries.  The 62S is 167 grams.  That means the 30X is only 60% the weight of the 62s..  sweet!
Well, I guess I'll see how this works practically in the next week, but so far, I think it's an improvement over my old 62s in terms of size, weight, resolution and battery life.  I'm sure Garmin could take another 1/3 of the weight out of this thing if they put their minds to it, and make the screen larger at the same time...  those two items would be on my wishlist for improvements.

Tuesday, 14 May 2013

Garmin Gpsmap 62S Screen Cover Replacement

     So I broke my screencover on My Garmin 62S last fall when I fell while hiking.  It was cracked but still remained waterproof.  I talked to Garmin’s terrible customer service to see if I could just get the screen cover – a small $2 piece of plastic to repair my cracked screen myself.  They told me I would have to send the whole unit in for the flat fee repair/replacement for $120 + tax + I would have to ship my unit back to them.  That would end up around $150 just to repair it.  No thanks.
     Luckily I looked around and found some dude from Russia on eBay selling a kit specifically for the Garmin 62 series to replace the screen cover.  Apparently other people have experienced this issue and the same frustration from Garmin’s customer service.  Go figure.  So I bought one.  Although for what you get it still is a bit expensive – around $30 shipped, you get a waterjet cut piece of Lexan or similar, cut to the exact profile of the 62 screen, some adhesive strips, and a screen protector.  Not too bad. 
     I didn’t really like the idea of using 4 separate strips for the adhesive, as I don’t think it would be as watertight as a one piece adhesive.  I use my GPS frequently around water and wanted maximum protection.  So I ordered for $1(including shipping!) a sheet of 3M 300LSE double sided adhesive for IPhone screens off of eBay from China as well.  It is a good OEM spec adhesive good for adhering to plastics.
     So I replaced the screen in all of about 7 minutes.  I opened the case, removing the 8 torx screws and sliding the electronics out. I used a heat gun to soften the adhesive on the cracked screen cover and took the screen cover and all the remaining bits of adhesive off.  I used the replacement screen cover to tracer and cut the300LSE adhesive sheet to the same outer profile, then placed it in the shell to trace the inside of the screen window and cut out the inside. 
   I put the adhesive on the replacement screen cover and installed it, pressing firmly in place to get maximum contact and adhesion.  Over time, and in the heat, the adhesive will adhere even better.  Then I reinstalled the electronics, reassembled the case, and lastly I cleaned the outer surface of the screen cover with rubbing alcohol and installed the screen protector using soapy water to eliminate the bubbles (this is a good trick for installing any screen protector!).  Done.  New screen and saved myself about $120, over what Garmin wanted, just to fix my cracked screen cover.  The only thing iis, it doesn't have the pretty black bezel with garmin lettering on the bottom, but I am OK with that, it is just as functional as when it was new.
 Really, Garmin and their lame repair policy can suck it... and I would encourage you to find your own replacement parts and fix your own unit, since Garmin would prefer just to replace your entire GPS instead of bothering to sell customers repair parts.
   

Sunday, 14 October 2012

Cracked Garmin GPSmap 62s Screen Cover



While in Temagami, I was pounding down Maple Mountain from the summit, my shoelace caught a branch sticking out on the trail and bodyslammed me into the ground.  I stumbled a couple steps, landed sideways and thankfully I just hit the peaty ground hard, not any big rocks.  Also thankfully, I had a backpack full of SLR cameras which were undamaged.
A short time later I glanced at my Garmin GPSmap62s GPS which was carbined to a D-ring on my left hip.  The plastic screen cover (not screen protector) was cracked – looks like my GPS smacked a rock while I was doing my impromptu luchadore impression on Maple Mountain.  Good thing I had a screen protector on top of it which retained it’s waterproof integrity - the GPS later in the trip fell off my caribiner into the water while getting into the canoe where I retrieved it undamaged.  Otherwise there would have been shards of broken plexiglass everywhere leaving the LCD screen unprotected for the remainder of the trip.  I can still read the LCD under the cracks, and it is undamaged.  But I requested to buy a replacement screen cover... you know, a small, clear plastic part.. a part I can change myself in 5 minutes.  Garmin informs me that they cannot sell me any parts.   I can ship the thing back to them for exchange for a new one or a refurbished one for the low price of $120.    Seriously?   Give me a break.  A handheld GPS for use in the backcountry should naturally have a service part available for a replacement screen cover.  I guess they went the way of Apple products – everything  is serviceable, just as long as you return it to them, wait a month for it’s return and also pay an exorbitant amount of money.
Really, the outdoor handheld market is the only thing Garmin has potential any more to grow,  due to the proliferation of smartphones killing their automotive market and they need to step up the customer service for issues like this to retain customers.  Now I have to wait around and monitor eBay for someone to sell a disassembled one for parts or someone to offer aftermarket screen cover, since I certainly refuse to pay $120 just to fix a small $1 piece of plastic screen cover, which should be a readily available replaceable item.  Garmin's fixed price 'repair'  (more like replacement) policy doesn't make sense to me - you pay the same price whether you destroyed your unit by running over your device with your car or you have a crack in a screen cover.

Monday, 23 January 2012

Kayak GPS Mount


      Kayak manufacturers seem to be pretty slow to evolve to changes.  I’m sure there’s some people diggin’ the built-in bow compasses and map to navigate because its oldschool, but I personally find a GPS indispensible and well worth the slight detraction from being one with nature while using an electronic GPS.  Especially in areas nearby like Georgian Bay where there’s literally thousands of islands and is quite simple to get lost – even with good map and compass skills.  I also like it for finding my put in and take out points and even use it for finding local pubs, places to eat or LCBOs in areas I am not familiar with.   
      That said, fixing your GPS to your kayak can be a challenging task.  Many kayaks have a built in recess to accommodate a bow compass but virtually none, even today have a mounting system for a GPS even though many people that kayak use one.
      When I first got my kayak I just used the carabiner clip to attach my GPS to the deck rigging, but it’s not accessible or visible hands-free and flops around rubbing on things on the deck.  So just a few weeks after getting my kayak I looked around for a kayak mount for my GPS.  At the time I had a Garmin Colorado.  I could not find any aftermarket mounts at all at the time, not even the suction ones.  Nowadays there are a handful of aftermarket GPS mounts but all of them are the suction cup type.   I don’t find the suction cup ‘ram mount’ type of mount ideal or acceptable – they are all way too heavy and I don’t want to rely on a suction cup to hold my GPS on my kayak either – especially on a rotomolded kayak. 
        I did find an OEM Garmin ‘marine mount’ for my Colorado GPS, which is also compatible mount with my newer Garmin GPSMAP 62s, but it seemed to have a three screw mounting pattern, which I assume is a common type of mount in the boating industry, the marine mount .  I bought one online and figured I would attempt to mount it to my kayak instead somehow when it arrived.  It turned out to be quite a simple and awesome solution for a kayak mount.

      When the marine mount arrived, I saw what it actually was – it has a round circular base plate that is intended to be fixed to a surface with three countersunk holes, and the upper part attaches to the base by a single thumb screw.  It has adjustments for yaw and pitch so it can be positioned just right for perfect accessibility and view.  So the trick was to figure out how to mount the base disc onto the kayak top surface in front of the cockpit.  I could have simply drilled three holes and mounted it with screws but I didn’t like that idea, since I didn’t want to add more screws and nuts to the underside of the cockpit to scrape my knees on, and I didn’t want to drill holes in the boat in the first place.  So I figured I would attach it with an adhesive.  After all, the disc is quite large (about 4” diameter), so even if an adhesive had moderate adhesion it should be OK.  But the top surface of my kayak is curved slightly not flat and didn’t match the disc quite well.  I ended up contouring the bottom surface of the mounting disc a little with the nose of a belt sander so the contours matched well.  I mounted the mounting disc to the top surface of the kayak with silicone caulking, after lightly sanding the kayak surface to roughen it and cleaning both surfaces with rubbing alcohol to maximize adhesion.  


      Just a note – the type of caulking that adheres best is actually the cheap kind, the one that smells like vinegar.  It also sets up the fastest.  The more expensive types I have used need 24 hours to set up and I have found they actually don’t adhere as well (but might make up for that with mold resistance).  After installing the baseplate several inches in front of the cockpit, leaving a bit of space for my skirt pull handle and using the mount, it was perfect for what I wanted.  I could even remove the mount easily, for transport or when I don’t want to use my GPS – leaving only the low profile mounting base on the kayak.
      Really, I find this a pretty awesome lightweight solution for a kayak mount for a GPS, even better than any other aftermarket ones that exist.

      I did have an  incident where the GPS popped off along with the upper mount from the lower base when I whacked it with my paddle shaft while frantically flailing around trying to paddle upstream.  I managed to find my GPS on the bottom of the icy cold fast moving stream after wading around the stream for an hour and a half.  Another time I lost my Garmin Colorado GPS, when I got caught in a strainer on Bronte Creek.  I had the upper mount tethered, but not the GPS itself since the Colorado didn't have any holes in it to be able to tether it itself and it popped out, still resting to this day at the bottom of Bronte Creek under a train bridge.  This only happened twice, but since I got my Garmin 62s have tethered the actual GPS to the rigging with a piece of paracord and a carabiner in case that ever happens again, if you are wondering what the cord is all about.
      Fortunately most Garmin GPSs have marine mounts available for them, and this can be the solution for you if you are looking for a GPS mount.  I have been using this for about 3 years now and it is perfect for what I want out of a GPS mount for my kayak.

A couple related links to kayak GPS mounts:

Saturday, 8 October 2011

Garmin GPSMAP 62S Review



Well, I’ve now been using the GPSMAP 62s for a full season.. I thought I would post a follow up review to my First Impressions Review, with the good points and point I feel could be improved upon with this device. 
I generally use a GPS for their basic functions, seeing where I am on a map or how to get to a place or waypoint, either by road or straight line.. I also collect the tracks from my trips for geotagging photos and keep records on my trips, and I use the GPS to look for nearby points of interest such as gas stations and restaurants on occasion.  Other than that, I don’t use (or need ) a bunch of the bells and whistles that come with the unit.  So instead of many paragraphs, here’s a quick list of my opinion of the good points and ones that can use improvement

Garmin GPSMAP 62s Good Points
- Profile configurations, can easily switch between automotive and recreational
- Ability to load and store different types of maps
- 'recalculate on road’ feature is very useful when tracking to a waypoint, to switch from straight line to rout along roadways
- Beeps are good for signaling turns when in automotive mode, although it would be good for it to be a bit louder
- The ability to attach the GPS to a variety of mounts is great
- Good shape for holding in hand
- Battery saving mode is great, so is battery life in general
- Screen modes highly configurable to display data you want in each view or mode
- 3 axis compass is very accurate and better than previous generations
- Slot for hand strap/lanyard is great (lost my previous Colorado 300 because it didn't have this)
- 
Garmin GPSMAP 62s Could Use Improvement
- Could be lighter, slimmer
- Processor is very slow, painful to do spell searches, and building the maps when zooming out is sometimes extremely slow
- Could use a waypoint management system to separate into folders.  Scrolling through many waypoints to find the one you want and spell searching are both painful
- Has many features that are not necessary and can be trimmed from the device – the share wirelessly, and GPS antenna connector features, among many software features are unnecessary in my opinion. 
- Mini USB connector should be switched to micro USB..  all phones have switched to micro now, so I wouldn’t need two car adapters
- Screen resolution very low, it would be nice for it to be significantly larger and higher resolution
- Instead of a rubber stopper type of water seal for the connectors at the back can be a more proper waterproof door, similar to newer waterproof cameras
- Plastic screen scratches somewhat easily
- Operating system layout is very complicated and needs a while to get used to remembering what you have to do to get what you want from the device
- I loathe Mapsource desktop software for loading maps, managing waypoints, tracks etc.  It feels like an outdated early 90s software.  The interface can be much more intuitive, slick and  much easier to use as well as more functional.  The search function is downright horrendous – you much exact match what you are looking for, or else you won’t find it
- Switch from AA to Lithium Ion battery source?  That is a tradeoff that would have pros and cons.

A note on screen protectors
The screen is lexan or some type of plastic, which can get scratched easily rubbing on branches, lying in the bottom of a canoe, or dropped while bike riding…   yeah I scratched the screen a bit by these things.  So I ordered a Protech screen protector.  The application is very simple, jut wet in soapy water, apply and squeegee off the excess water with the card provided – if you mess up you can peel it back off and reapply.  It is ultra clear and I don’t notice it’s on there at all – no bubbles, no fingerprints from the application.  It even hides some old scratches that are on there before application.  I would recommend these for sure.
This is much better than most screen protectors that once you begin to stick it on, you are at the point of no return and are more likely to have bubbles, fingerprints on them.  Some screen protectors affect the quality of viewing the screen, but the Protech is invisible.

Summary
All these things said, the GPSMAP 62s does what I need it to satisfactorily, like I said I only use certain basic functions.  I would recommend it, but it would be good to improve some things on it. 
In the end, I just want a  simple GPS unit that does basic functions, but does them very efficiently and well.  For my use, I just want a stripped down, lightweight GPS unit that has a fast processor, excellent battery life and large high resolution non-touch screen.  It would be nice if a company can make a unit like that, instead of spending effort adding functions such as cameras, sharing wirelessly, antenna jacks, touch screen and other things and other BS 'value added' things that just add weight and cost for features I don't want or need.
 If anyone can recommend a better unit than this that does these things I want, let me know!

Monday, 16 May 2011

Garmin GPSMAP 62s First Impressions

 


EDIT:  Updated with a review after using it for 1 season here.

When it comes to hand held mapping waterproof GPS units primarily intended for backcountry GPS use, it seems there are only a few manufacturers that happen make these.  Garmin, Magellan and Delorme are ones that come to mind.  Perhaps I should, but I have not tried any of the Magellan or Delorme units before.  The problem is, to really get to know the capabilities and limitations of a GPS unit for these purposes you have you actually use it in the field, instead of just fiddling with it for 10 minutes in the store or a sales guy simply demo’ing it to you.  If you don’t know someone with one of these units you can try, there’s simply no opportunity to try it in the field, you have to simply research online and pick one unfortunately.

That said, I have had a Garmin Colorado for the last three years.. actually I had two of them.  I had to send my original one in 2 years in, because the mini USB connector had stopped functioning and I got a refurbished one back after paying $120 for it.  The Colorado was quite new at the time, it had a wheel like interface with a rocker/button in the center of the wheel and two buttons on either side of the wheel.  This model is now discontinued and I’d hazard a guess it is likely due to the clumsy and difficult wheel interface.  For simple tasks, it was fine, but for things like entering text it was a nightmare, sort of like the entering your initials on old video game credits – you had to scroll through the entire alphabet to find the letter or number you are looking for, only to have to repeat the process for the subsequent letter.  Frustration is an understatement.  I would still have this GPS, if it were not for the fact that this GPS is now rests under a train bridge, at the bottom of Bronte Creek in a fast moving section.  I lost it there last week while kayaking when by kayak got caught under a log and I had to eject.  The GPS was in a marine mount and I suspect it had gotten pushed down until the latch on the mount holding the GPS released, enabling the GPS to slide out of the mount and fall off.  At least this is what I figure happened – at the time I was too busy trying to grab my paddle and get my ass out of the frigid water.  So I researched the different GPS products out there and decided to pick up a GPSMAP 62s.  I chose Garmin again, because of familiarity, and the fact that the trusted and true GPSMAP 60Cx is still somewhat the benchmark of what this genre of handheld is compared to, and the 62s is the ‘next generation’ version of it.  Call me old fashioned, but I still can’t stand touch screen devices.  They still never work all the time, such as when my hands are cold and dry, and suffer from lack of tactile feedback and fat finger syndrome where something gets selected that is not intended to.  Not only that, it takes energy to run the sensor for the screen, and if you drop it and crack the screen you are SOL for using it.  So I ordered a GPSMAP 62s online on sale from a company in Calgary and got it two days later.

There’s just something about Garmin units that I notice when I get one of their units.  I noticed it when I got my Colorado 300 and now that I have the 62s, I notice it again.  Compared to other handheld electronics on the market at this time, Garmin products always just seem to be a ‘this generation’ model, if even that,… just always seem a little underwhelming to me.  The styling is great and up to date, just it seems like Garmin isn’t trying hard enough or doesn’t want to push technology too fast, quite unlike phone and camera manufacturers, likely due to the lower competition, and overall GPS market segment than say, a phone or a camera.  Things that instantly are noticed that reinforces this thought when I started playing with the 60s are some of the following: very low resolution screen, the small screen size itself, battery type, heavy weight and size of the unit and some other functions.  The screen is a ridiculously low resolution 160 x 240 screen… seriously Garmin – get into the 21st century and get a decent resolution screen.  The screen size itself is unnecessarily quite small as well.  Other electronic manufacturers have gone through great pains to maximize the screen sizes on the given real estate of the form factor, whereas on the 60s head on, there is tons of real estate that could have been used, even without increasing the unit size, in order to maximize screen size.  There is an unnecessary wide black bezel around the screen, the buttons on the bottom can be made slightly smaller, closer together, and lower on the unit, there’s much more room available towards the top of the unit as well that could be used.  It looks like Garmin just wanted to drop an old, already existing screen into the unit and not have to bother with developing a new one.

The unit still uses AA batteries.  Lithium batteries would seem like they would be the more progressive choice for a design of a new unit, all other electronics use them nowadays for their advantages over NIMH AA batteries.  There are some small advantages of using AA batteries such as being able to find them everywhere, but the pros of lithium batteries really should make that the choice over NiMH.  I don’t mind buying an extra lithium battery for my camera so I can have a spare on hand for longer journeys.  A lithium battery would offer better charge times, lighter weight and smaller unit as well.  It can also be sized accordingly for whatever battery life the designer chooses.  I would also wish manufacturers to standardize lithium battery form factors and chargers in general which would benefit everyone in the end, but I digress.

The GPSMAP 62s is a heavy brute.  I am not sure why, but it seems like the Garmin product designers don’t even have low weight on their radar for a design target when designing new units.  Obviously people are backpacking and lugging these things around, mounting to different surfaces, etc. and a lightweight unit would definitely be desirable, but it isn’t the case with this.  I know the unit needs to be rugged, but again, I suspect Garmin hasn’t really optimized the casing to be low weight yet rugged at the same time, instead just throwing more plastic into the case to withstand beatings.  Not to mention there’s a huge chunk of investment cast aluminum that’s just used for the mounting interface at the rear of the unit – way overkill IMO.  Every fraction of an ounce counts to many people who use these types of GPS units.

Some other issues that I consider slight annoyances with this unit, I see others complaining about online is the squeaking case and the variable barometer function.  The case on my 62s squeaks a tiny bit if I squeeze it hard, which does not bother me all that much.  If it gets worse, I’ll just unscrew the two halves of the case and apply silicone grease to the interface. I don’t know how that compares to earlier 62s units, but there seems to be many people complaining about it.  The barometer spikes a little if I press hard on the case – the air pressure around wherever the sensor is must increase a bit and temporarily shows a few meters higher elevation before it settles back down.  I read online some people saying it spikes if they just press a button, but this doesn’t happen with mine.

One last annoyance is the Garmin’s Steve Jobs-like obsession regarding piracy and controlling what software applications the device uses, trying every trick in the book to make the maps difficult to use, not caring about extra difficulties they cause to people that want to use legitimate maps on their devices.  Now the firmware on this GPS checks or ‘authenticates’ maps.  This can cause some issues even with legitimate software that is frustrating to say the least.  When you load the maps on the unit from MapSource, it can give you a ‘can’t authenticate map’ error and simply makes the map totally unavailable to use.

Now that I have unloaded a dump truck full of initial bad impressions and complaints about Garmin itself off my chest, here’s some good improvements I have noticed, at least over the Colorado: battery consumption, lanyard slot, three axis compass and battery cover design. 
I’ve only used my new GPS a couple times for short trips.  I can say that the menus are a little difficult to navigate, although I will get used to them after learning to use them.  One other thing, when I want to zoom in and out of maps, I find I keep reaching with my thumb for the non-existent wheel at the top with my thumb that my Colorado had.  The buttons placed at the bottom do make for less than convenient ergonomics, sine your thumb or fingers aren’t naturally in those locations when holding the GPS in your hands.  From the limited time I have used the GPS, it seems to have much better battery consumption than the Colorado.  One thing I hate is when batteries run out of juice and I can’t even log my track to geotag pictures or save my track for other purposes.  I see Garmin took a suggestion I sent to them to heart, or perhaps others did as well – to add a mode where you can turn the screen off completely when not touching the buttons for a number of seconds, for the device to conserve battery power by not using up power to display the map constantly when it is not needed.

The whole reason why I in fact needed to get a new GPS is due to the fact that the Colorado had no lanyard ring to secure it to something…  i.e. my kayak, so when it came out of the mount, it disappeared into the murky depths of Bronte Creek.  But, thankfully, the 62s has a slot in the bottom of the case for a lanyard, even when mounted in the marine mount, which by the way, is the same mount as the Colorado, Oregon and Dakota series.

The three axis compass is a vast improvement on the Colorado’s compass.  The base model GPSMAP 62 does not have a compass or barometer, but the 62s and the 62st (with built in topo maps as well) have the three axis compass.  The calibration takes three steps for each of the axes but is much less frustrating than the Colorado.  It always seemed I was rotating the init too fast or too slow on the Colorado, but the GPSMAP is more forgiving about the speed and allows you to rotate it faster.  Since the GPS is tilted at a 45 degree angle or so on my kayak, the Colorado had trouble sensing the true heading and the maps frequently were displayed sideways to my direction.  This seems to fix that.

OK, one last comment for now, this one regarding the battery cover seal.  Thankfully, the previous horribly designed slide on cover the Colorado has wasn’t brought to the 62s.  The sliding cover on the Colorado frequently was had to come off if your hands were slippery with water or sunscreen or whatever, and anyone that knows anything about oring seals knows you don’t design something to seal the way the Colorado did.  The 62s has a hatch that has a tab on one side and is pushed down and locked a quarter turn latch.  Much better.

Anyways, that is way too much for now.  I’ll be making comments on this unit more as I get more experience with it.